You want to assemble your conversion kit yourself, run your car on water, and extend your mileage and save those pennies! The following are the hardware tools you will need to complete your conversion.
1) An electrolyser: Also known as a “hydrogen generator”. This has spiral electrodes that emit more HH0 and require less battery power.
2) Improved map sensor: This device electronically reduces fuel consumption but does not interfere with your computer or engine. To maximize fuel economy, this is a must.
3) In the vaporizer: This cools the engine while adding water vapor, which will improve fuel economy and combustion.
4) Fuel heater: This will improve your gas economy by preheating your gasoline through the heat given off by the radiator, therefore FREE heat that would otherwise go to waste. This does not require changes to the radiator hoses.
5) PVC enhancer: Positive crankcase ventilation saves gas and protects your engine.
6) Fuse holder and wiring: This is connected to your 12 volts.
7) Vacuum Tee: This will split the vacuum line in 2 to supply oxygen and hydrogen to the engine.
8) A pair of vacuum hoses: Three and a half feet long. One that will connect to the air filter and the other to the intake manifold.
9) Mechanical installation hardware: Some cable straps for the fuel heater, 8 bungee cord cable straps for the electrolyser, flexible tubing for the wiring harness, and some vinyl tubing.
10) Catalyst: In this case, baking soda is used to water in HH0.
OH AND WATER!
You now have everything you need to successfully follow your instructions to convert your car to run on water.
I hope this helps!
