One of the biggest challenges in keeping a space clean is high-traffic floor areas. High-traffic areas typically include stairways, lobby areas, entrances and exits, restrooms, elevators, cafeterias, and manufacturing areas. In some cases, such as factories, this may sound like the whole building! Keeping these areas clean not only makes the place look classy and clean, it also controls wear and tear on the floor to some degree. Here are some cleaning tips that might help.
Apply prevention techniques
Before talking about how to clean the floor, it is important to find ways to prevent it from getting dirty in the first place. For example, a simple foot mat outside entrances and exits can reduce the amount of mud and dirt accumulated on the floor in these areas. Using rugs on hardwood floors during rains can also help to do this. Similarly, if something spills on the floor, train your staff to clean it up immediately.
Clean at the right time
Regardless of the industrial cleaning chemicals you use, if a person were to walk on the floor before it has dried, the floor will look dirty. Therefore, schedule floor cleaning at times when traffic is minimal. If you must clean the floor while the space is in operation, divide the area into sections for cleaning. Block each section before cleaning and open it again only after the floor has been cleaned and is dry. For this you can use physical barricades or caution tape.
Create the right cleaning schedule
Some places need to be cleaned more frequently than others. It is also possible that the floor gets dirtier on certain days and at certain times compared to others. For example, if new supplies arrive at a factory on a Monday, it will probably be when the floors are dirtiest. Similarly, floors are likely to need more frequent cleaning during rains than during summer. So keep these factors in mind when creating a floor cleaning schedule.
Keep it dry
When choosing a floor cleaning chemical manufacturer to work with, you need to look not only at how effectively the cleaning fluid works, but also how quickly it dries. The best manufacturers of industrial chemicals will be able to ensure that their product dries quickly so there is no fear of slipping on wet floors. You can also speed up the drying process by turning on fans or using a dehumidifier at times when the relative humidity is higher than normal.
Source: Industrial Chemical Manufacturing in India
